The following custom-woven fabric styles are
approved under STC SA1008WE and are available for installation on
approved certified aircraft as listed on FAA Master Eligibility List
No. 1008 published in the Poly-Fiber Procedure Manual No. 1.
Considered our standard fabric, it
is recommended for normal service and is widely used on all types of
aircraft, regardless of wing loading or horsepower.
All classics, antiques, and contemporary designs that anticipate
normal on-airport operations.
Thread Count: 60 x
60/in Bursting Strength:
Weight: 3.16 oz/sq
Strength: Warp 106 lbs, Fill 113 lbs
Strength: Avg 110 lbs/in
Our extra heavy-duty fabric
recommended for the most severe operating conditions and very
high-wing loading aircraft. Its large filament size and high
strength provide excellent resistance to rock penetration and
tearing, characteristics required for trouble-free bush and
agricultural operations. It is suitable for all aircraft where a
very tough, durable, low elongation, high-tension fabric is
Aerobatic and bush planes, ag aircraft, and warbirds.
Thread Count: 69 x 63/in Bursting
Strength: 276 psi
Weight: 3.5 oz/sq
yd Tear Strength: Warp 125 lbs, Fill 116 lbs
Breaking Strength: Avg
Our light-weight fabric is
recommended for covering plywood surfaces on any aircraft and any
ultralight aircraft that is not certified. On certified
aircraft, it is only approved for covering plywood surfaces.
This fabric will be unstamped.
Thread Count: 90 x
76/in Bursting Strength: 156 psi
Weight: 1.87 oz/sq yd
Tear Strength: Warp 66 lbs, Fill 72 lbs
Breaking Strength: Avg 69 lbs/in