- It's A Complete System -- No More Shopping
When you cover your airplane with Poly-Fiber, you get
need. All the tools and materials, all from your Poly-Fiber distributor.
- The Best Manual in the Business!
151 pages of step-by-step instruction, helpful photos, great nostalgic
cartoons, extra words of wisdom, and a delightful sense of humor. And we've
included our entire catalog of products, everything from fabrics to stirring
paddles. Current Procedure Manual No. 1 is Revision No. 21, dated
- You'll Like Our Aggressive Factory Support!
We have an 800 number for Technical Support, not just sales. Or address
your e-mail to firstname.lastname@example.org.
- We Conduct Hands-on Workshops.
Throughout the US and Canada we conduct how-to workshops sponsored
by our distributors, EAA
SportAir Center. Our mini-workshops are also incorporated into major
airshows and fly-ins like Oshkosh, Sun 'n Fun, Copperstate, Arlington, and
the LAA Rally in Sywell, England.
- There's An Instructional Video.
This new EAA Sportair two-hour comprehensive video presents every aspect
of our Poly-Fiber fabric covering process in detail and in easy-to-understand
language. From preparing the airplane for covering to spraying on the colors,
you are guided step by step through the entire process by a professional EAA
Sportair fabric instructor. Covers: preparing surfaces, attaching the fabric,
tightening the fabric, applying the first coat of Poly-Brush, tying rib-lacing
knots, applying finishing tapes, spraying Poly-Spray, applying color coats.
- You Always Have Worldwide Availability.
Our network of distributors covers the US, Canada, and much of the
world. On top of that, you'll find Poly-Fiber products in the catalogs of
all the major supply houses. You can always get the Poly-Fiber product
"Why should I use Poly-Fiber?"
"What will it cost to cover my
- "Is Poly-Fiber more expensive
than other systems?"
No, they all cost about the same! Although dope costs less per can
than Poly-Fiber, you use twice as much dope as Poly-Fiber. Price them out
for yourself. You'll find they pretty much even out.
"How many steps are there?"
There are just six basic steps:
Glue on the fabric with our Poly-Tak fabric cement; tighten
it with the heat of a calibrated clothing iron.
Brush on a coat of Poly-Brush fabric sealer.
Riblace, then apply gussets and finishing tapes with more Poly-Brush.
Spray on two more coats of Poly-Brush.
Spray on three cross coats of silver
Poly-Spray to block
Spray on three coats of top coat paint, either
Poly-Tone, Aero-Thane or
"That's six coats. How much
does that weigh?"
Surprising little. Total fabric and
coating weight is about 60 pounds, not the
usual 75. Smaller aircraft and ultralights average about 20 to 25 pounds.
For extreme ultralights it's possible to skip some steps and get down to 12
to 15 pounds, but this covering won't have all the capabilities of the full
- "Can I use automotive paint over
a Poly-Fiber base?"
Since 2001, the FAA has required that fabric
covered aircraft (at least the fabric parts) be painted only with
topcoat paints tested and approved on an STC. Use of any other
topcoat paint will void the STC and airworthiness of the aircraft.
Up to 2001, the STC's "ended with the silver", and any type paint
was legal to use. This is no longer true. Over the years, increased
use of brittle automotive or industrial paints caused enough
cracking and delamination to cause the FAA to rethink approving
untested topcoat paints over fabric. Failed topcoat paints expose
polyester fabric to sunlight and UV damage. As of the latest
revision of the Poly Fiber STC Procedure Manual (revision 21,
September 2006), only the following topcoat paints are
approved on the Poly Fiber STC: Poly Tone, Aerothane, or Randolph
Ranthane. All three of these paints have long service lives over
fabric as well as an FAA Parts Manufacturing Authority (PMA), which
allows their application on certified aircraft. For instance, a J-3
Cub must have only Poly Tone, Aerothane or Ranthane over the
fabric parts, but you could use enamel or anything else over the
struts, cowl, fairings, etc. The keyword is FABRIC. Experimental
aircraft are not bound by these rules, however,
we do recommend using products with known
track records on fabric components.
Our primary goal is to provide you with the products you need to cover
your airplane PLUS the clear concise instruction you need to use those products to
complete the job.